Glaco Windshield Coating Agent and Wiper Series
Wiper Type

Glaco Power Blade

Stable wiping, forming strong water-repellent layer!

  • Content : 1pc

Technology of "Glaco Power Blade"

Condensed Glaco component is impregnated in silicone rubber. Only operate with this wiper, forms strong water-repellent layer on windshield surface, and provides you clear visibility. Rubber is coated by newly developed graphite, to diminish unpleasant squeaking of wiper.
In addition, if you use this wiper for Glaco coated windshield, it restores coating layer and improves durability of water-repellent effect.

Only by wiping, makes Glaco coating

Only by wiping, makes Glaco coating

Just by turning on this wiper on dry windshield, you can get almost same effect as Glaco applying.

Creates water-repellent layer

Creates water-repellent layer

Although conventional wiper requires wiping for 5 min on dry condition in order to form coating layer, Glaco Power Blade forms water-repellent layer in half of time (about 2 min, according to our test).

Newly developed "S・L・F Coat" enables sharp wiping

Newly developed "S・L・F Coat" enables sharp wiping

In order to improve low frictionality of graphite, wiper rubber is coated with newly developed "Super Low Frictional Coat" with fluoric resin. Diminishes unpleasant squeaking of wiper, and enables sharp and smooth wiper operation.

Strong frame provides stable wiping performance

Strong frame provides stable wiping performance

Glaco Power Blade consists of high rigidity frame made in Japan, which prevents rattling during operation, and enables stable wiping.

How to use "Glaco Power Blade"

Before replacing wipers

  • After opening package, make sure that the wiper rubber doesn't come off from the frame, and all parts are not deformed or missing.
  • Stop the car engine, and make sure that the wiper switch is OFF.
  • Remove oil-film and stain on the windshield surface in advance.
  • For avoiding scratching, place a soft cloth and the like on the car body and glass.
Pull up wiper arm.

Pull up wiper arm.

Pull up the wiper arm to stand, and turn the blade so that wiper rubber comes to upside.

The cars with wipers hidden under bonnet, check the car manual and work in accordance with its instruction.

Detach blade

Detach blade

Push the stopper pin, and slide the blade to remove.

[ How to remove cover type blade ]
Push up cover, and slide wiper blade to remove.

Attach new wiper blade.

Attach new wiper blade.

Slide the clip of blade into wiper arm's U shaped hook, and insert it till you hear clicking sound.

After installation, operate wipers about 10 times, and make sure that it works normally, and it doesn't touch the car body.

  1. Glaco - TOP
  2. Products : Wiper Type
  3. Glaco Power Blade

All Wiper Type